Vergelijk aanbieders (2)
€ 349,00 Gratis verzending
Winkels met andere maten
Productinfo 4-channel full-range amplifier in Class D, 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V Utilizing JL's exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is designed to deliver clean power loads with excellent efficiency and low distortion. It outputs 100 watts from each of its four channels into 2 ohms (14.4 V, 1 % THD) and is fully bridgeable, so it can be used as a 3-channel amplifier or as a 2-channel amplifier with an output of a whopping 200 W x 2 into 4 ohms. The controls of the JD400/4 are located on the input panel of the amplifier, with all speaker and power connections located at the opposite end of the extruded aluminum enclosure. Signal processing features include high or low pass filters with 12 dB/octave (can be switched off) for each channel pair with stepless frequency selection from 50 to 500 Hz and differential balanced dual range inputs that can accept line or speaker level signals. Automatic switch-on function (via signal scanning or DC offset scanning) is part of the standard equipment. Onboard LED clipping indicators are also included, surrounding each input sensitivity control. This useful function allows you to adjust the input sensitivity of the amplifier quickly and precisely without the need for special equipment. With an additional RBC-1 remote control (sold separately), you can control the subwoofer level from the driver's seat. Rated continuous power (RMS) at 14.4 V @ 4 Ω : 75 W RMS x 4 @ 2 Ω : 100 W RMS x 4 Bridged @ 4Ω : 200 W RMS x 2 Rated continuous power (RMS) at 12.5 V @ 4 Ω : 60 W RMS x 4 @ 2 Ω : 90 W RMS x 4 Bridged @ 4Ω : 180 W RMS x 2 General specifications Frequency response : 12 Hz - 22 kHz (+0, -1dB) S/N ratio, relative to the highest rated power : >104 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) Attenuation factor @ 4 Ω : >150 / 50 Hz Attenuation factor @ 2 Ω : >75 / 50 Hz THD+N @ Nennleistung :
Car Hifi TwenteDe JD-serie zijn compacte en fraai gestylde versterkers met clean power technologie waarbij de focus ligt op stabiel en zuiver vermogen met weinig vervorming dit mede dankzij NexD high speed switching technologie waardoor deze versterkers super efficiënt zijn. JL AUDIO JD400/4 Klasse D 4 kanaals versterker Frequentie bereik: 12 - 22.000 Hz 4 x 75 watts RMS 4 ohms 4 x 100 watts RMS 2 ohms 2 x 200 watts RMS 4 ohms mono gebrugt High / Lowpass filters: 50 - 500 Hz / 12 dB Afm: 242 x 53 x 180 mm Extra informatie: Utilizing our exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is engineered to deliver loads of clean power, with excellent efficiency and low distortion. This little guy churns out 100 watts of audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms. The JD400/4’s controls can be found on the input panel of the amplifier, with all speaker and power connections located along the opposite end of the extruded aluminum chassis. Signal processing features include high or low-pass 12 dB / octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting line-level or speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment. Onboard LED-clipping indicators are also included surrounding each input sensitivity control. This convenient feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. You will also find a set of buffered, pass-through preamp outputs on-board, so you can pass signals to another amplifier.
Productvideo
Prijshistorie
Prijzen voor het laatst bijgewerkt op: