608 LLU MAX EE ABEC 3 (Radial) 8x22x7/10 (1mm/2mm)
Beschrijving
Bol Partner
608 LLU MAX-EE MAX-Design, Extended Inner Race, ABEC-3, radial suspension bearing - (CN Clearance) - 8mm x 12mm x 7/10mm (1mm/2mm) - Enduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside. This bearing features a double-extended inner race that eliminates the need for extra spacers to connect suspension linkages. The primary use for this bearing is as a suspension pivot bearing. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements. Static load - 483lbf / 2.18kN - Weight - 12.7g -
Beschrijving
(2)
608 LLU MAX-EE MAX-Design, Extended Inner Race, ABEC-3, radial suspension bearing - (CN Clearance) - 8mm x 12mm x 7/10mm (1mm/2mm) - Enduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside. This bearing features a double-extended inner race that eliminates the need for extra spacers to connect suspension linkages. The primary use for this bearing is as a suspension pivot bearing. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements. Static load - 483lbf / 2.18kN - Weight - 12.7g -
AmazonEnduro-lagers, speciaal ontworpen voor verende draaipunten, waren bijna 20 jaar geleden een pionier op het gebied van lagers van het MAX-type voor fietsen om de uitdagingen van mountainbike-draaipunten aan te pakken. Deze lagers hebben 35-40% meer draagvermogen dan standaard radiale lagers. LLU-afdichtingen bieden maximale bescherming tegen de elementen, terwijl de 90% vulling van Alma-gard Extra High Pressure Grease binnenin blijft Afmetingen: 8x22x7/1-2/10
Productspecificaties
| Merk | Enduro |
|---|---|
| EAN |
|
| Materiaal |
|
| Kleur |
|
| Maat |
|
Prijshistorie
Prijzen voor het laatst bijgewerkt op:
Gerelateerde producten
Naar shop
