JB Systems Rack Case 10/18U
Beschrijving
DJGear
JB Systems Rack Case 10/18U Beschrijving Very practical multi-purpose rack case. Extra rack space on top to install 19" mixers, controllers, etc Sliding Laptop support Keep your equipment wired in the case so you can set up your gear in seconds ! Equipped with 4 rotating castors of good quality (2 with brake) The details make the difference: Front cover: can be transformed in seconds into a table the table can be used on the right side or the left side of the case. A cable passage is provided on both sides of the case Laptop support: Thanks to its design, the portable computer can stay inside of the case during transport The Velcro straps fixed on the tray + the extra foam in the top cover will help to keep your laptop in place during transport The rails of the laptop support tray are mounted low enough so they are not disturbing you when you use a 19" mixer or controller in the horizontal rack space. If you don't need this laptop support, you can simply take it off Rear door: Faster to open / close as a normal rack cover Corner cutout so the door can be closed, even when cables come out of the case.
JB Systems Rack Case 10/18U Beschrijving Very practical multi-purpose rack case. Extra rack space on top to install 19" mixers, controllers, etc Sliding Laptop support Keep your equipment wired in the case so you can set up your gear in seconds ! Equipped with 4 rotating castors of good quality (2 with brake) The details make the difference: Front cover: can be transformed in seconds into a table the table can be used on the right side or the left side of the case. A cable passage is provided on both sides of the case Laptop support: Thanks to its design, the portable computer can stay inside of the case during transport The Velcro straps fixed on the tray + the extra foam in the top cover will help to keep your laptop in place during transport The rails of the laptop support tray are mounted low enough so they are not disturbing you when you use a 19" mixer or controller in the horizontal rack space. If you don't need this laptop support, you can simply take it off Rear door: Faster to open / close as a normal rack cover Corner cutout so the door can be closed, even when cables come out of the case.
Bol PartnerZeer praktische kast voor veelzijdig rack. Extra rackruimte bovenop om 19-inch mixers, controllers enz. te installeren Uitschuifbare steun voor laptop Houd uw apparatuur bekabeld in de kist, zodat u uw uitrusting in seconden kunt opstellen! Uitgerust met 4 hoogwaardige zwenkwielen (2 met rem) Het verschil zit hem in de details: Voordeksel: Kan in seconden tot een tafel worden omgevormd. De tafel kan links of rechts van de kast worden gebruikt. De kast is aan beide zijden voorzien van een kabeldoorvoer. Ondersteuning voor laptop: Dankzij het ontwerp kan de draagbare computer tijdens het transport in de kast blijven. De laptop wordt tijdens het transport vastgezet met klittenband banden en extra schuim in het bovendeksel. De rails van de steun voor de laptop zijn laag genoeg gemonteerd om u niet te storen wanneer u in de horizontale rackruimte gebruik maakt van een 19-inch mixer of controller. Als u deze laptopsteun niet nodig hebt, kunt u hem gewoon verwijderen. Achterdeksel: Sneller te openen/sluiten dan een normaal rackdeksel. Uitsparingen in de hoeken, zodat het deksel kan worden gesloten, zelfs als er kabels uit de kast komen.
Prijshistorie
Prijzen voor het laatst bijgewerkt op: